The OXYMETAL Group is equipped with machines for surfacing and machining flame cut parts of large dimensions to fulfil the requirements of its customers such as press toolmakers.

 

 

MACHINING SPECIFICS

Flame cutting and machining of plates for: press toolmaking, mechanical toolmaking, general mechanics, building and civil works, special machines, agricultural machinery, metallic architecture

Pre-machined plates: rough or milled edges, rough or machined sides

Machining: drilling (dia. 6 to 50mm) – Tapping (M6 to M32) – Surfacing

Precision of surfacing: 0.1mm/m, Parallelism 0.15mm/m, Roughness Ra included between 1.6 and 3.2,

MACHINING APPLICATIONS

Types of materials: Common construction steels, anti-abrasion steels, HLE steel, etc. 

Thickness: From 6 to 260mm

Levelling: 600 tonnes hydraulic press of +/-1.5mm per metre for thickness less than 100mm, +/-2mm per metre for thickness greater than 100mm

 

MACHINING EQUIPEMENTS

Machine fleet: Milling machines, 3 axes with gantry, maximum capacity 5,000 x 2,500 x 800

LASER CUTTING


At the forefront of technological advances, since the early 90s the OXYMETAL Group has focused its development on laser cutting, combining power, precision and productivity.

To find out more

OSC® TEST WEIGHTS AND CACES


The OXYMETAL Group offers a complete range of test weights and CACES® weights, marketed under the OSC® brand.

Our test weights enable you to carry out all the mandatory periodic checks on lifting and handling equipment required by the VGP (Vérifications Générales Périodiques) regulations. 

Our CACES® weights are suitable for training and passing the various CACES® tests, and comply with INRS recommendations R482 and R489.

SAFETY - SIMPLICITY - SPEED - PRECISION